show loop-detect no-shutdown-status
Shows the status of interfaces in a loop.
Modes
Privileged EXEC mode
Usage Guidelines
Use this command to show the status of the interfaces in a loop.
The
show loop-detect no-shutdown-status command displays the following information:
| Output field | Description |
|---|---|
| Port | The specific interface |
| Loop status | The duration the port has been in a loop |
Examples
The following example shows the ports and their loop statuses.
device# show loop-detection no-shutdown-status
loop detection no shutdown syslog interval : 5 (unit 1 min /Default 5 min)
loop detection no shutdown port status :
Note: Port's loop status gets cleared if loop is not detected in a particular interval window
Port || Loop Status
==================||==========================
ethernet 1/1/7 || (In Loop For 2309 Seconds)
ethernet 1/1/15 || (In Loop For 2309 Seconds
History
| Release version | Command history |
|---|---|
| 08.0.20 | This command was introduced. |