system-max igmp-snoop-mcache

Configures the maximum number of Internet Group Management Protocol (IGMP) snooping mcache entries supported on a device.
Syntax
system-max igmp-snoop-mcache num
no system-max igmp-snoop-mcache
Command Default

The default maximum number of IGMP snooping cache entries is supported.

Parameters
num
Specifies the maximum number of IGMP snooping mcache entries supported. The value ranges from 256 through 8192. The default maximum number of IGMP snooping mcache entries is 512.
Modes

Global configuration mode

Usage Guidelines

For ICX 8100, ICX 8200, ICX 7850, and ICX 7550 devices, values are used from the forwarding profile and there is no option to change these values. When a new profile is selected, the values from the new profile are applied. Refer to the forwarding-profile command for more information.

ICX 7150 devices support up to 3072 IGMP snooping mcache entries. The default number of IGMP snooping mcache entries is 512.

ICX 7650 switches support 8000 IGMP snooping mcache entries.

The no form of the command restores the default maximum number of IGMP snooping mcache entries.

Examples

The following example sets the maximum number of IGMP snooping mcache entries supported on the device to 2000. 

device# configure terminal
device(config)# system-max igmp-snoop-mcache 2000
Parent topic: Commands Si - Z