`auto-lacp`

Configures the auto-LACP (Link Aggregation Control Protocol) deployment for a specific port or a range of ports.

Syntax

auto-lacp ethernet stack-id/slot/port [ ethernet stack-id/slot/port | to stack-id/slot/port ]

no auto-lacp ethernet stack-id/slot/port [ ethernet stack-id/slot/port | to stack-id/slot/port ]

Command Default

Auto-LACP is not deployed on any ports in the system.

Parameters

ethernet stack-id/slot/port: Specifies the Ethernet port or the beginning range of the port list in terms of stack ID, slot number, or port number.
to stack-id/slot/port: Specifies the end range of the port list in terms of stack ID, slot number, or port number.

Modes

Global configuration mode

Usage Guidelines

The no form of the command removes the auto-LACP configuration for a specific port or range of ports.

Examples

The following example configures the auto-LACP deployment on the ports 1/1/7 and 2/1/11 to 2/1/12.

device(config)# auto-lacp ethernet 1/1/7 ethernet 2/1/11 to 2/1/12

History

Release version	Command history
08.0.40	This command was introduced.

auto-lacp