multicast static-mcache profile

Selects a profile for adding multicast addresses to the HW forwarding database.
Syntax
multicast static-mcache profile profile-id
no multicast static-mcache profile profile-id
Command Default

A profile is not selected.

Parameters
profile-id
Specifies a profile. Valid values range from 1 through 10.
Modes

Global configuration mode

Usage Guidelines

Up to ten profiles are supported.

When SDVoE is enabled for a VLAN, a default profile is added automatically and static mcaches are created for the groups in the default profile. If you want packets for some multicast groups to be flooded in the hardware, you can add mcaches statically for those groups, either to flood or drop those packets.

The no form of the command removes a profile.

Examples

The following example adds a profile for adding IP Multicast addresses to the HW forwarding database.

device# configure terminal
device(config)# multicast static-mcache profile 8
History
Release version Command history
09.0.00 This command was introduced.
Parent topic: Commands M