manager connect

Connects the ICX device to ICX-Management.
Syntax
manager connect
Modes

Privileged EXEC mode

Global configuration mode

Usage Guidelines

When an ICX device is managed from RUCKUS One, the manager connect and manager disconnect commands should be used to connect to and disconnect from ICX-Management. These commands do not change the running configuration timestamp, which ICX-Management uses to determine whether any configuration changes have been made on the ICX device.

Examples

The following example connects an ICX device to ICX-Management in RUCKUS One.

ICX# manager connect

ICX# show manager  status
============    MGMT Agent State Info     ===================
 
Manager mode: RuckusOne
Config Status:Enabled Operation Status:Enabled
State:NATS CONNECTED  Prev State:NATS CONNECTING   Event:RUCKUS_ONE_NATS_CONNECT_EVENT
 
BSICLOUD Status         : NA
 
SWR Host                : sw-registrar.ruckuswireless.com
SWR List                : None
SWR fqdn                : device.ruckus.cloud
DNS List                : None
 
Active FQDN List        : None
Backup FQDN List        : None
Active List             : None
Backup List             : None
Active List IPV6        : None
Backup List IPV6        : None
DHCP Option 43          : No
DHCP Opt 43 List        : None
DHCPV6 LIST             : None
Merged List             : device.ruckus.cloud
RuckusOne Server Used   : device.ruckus.cloud
Port List               : None
Server Port Used        : 443                                     
Query Status            : Initiated
 
NATS Tunnel Status -:
Tunnel Status             : NATS CONNECTED
Websocket Port            : 12448
NATS Port                 : 12440
RPCLI Status              : None
RuckusOne Hbt Count       : 6
RuckusOne JWT Renew Count : 0
RuckusOne JWT Renewel Time : 2025-05-15 08:54:39
 
Stream Status :- 
Stream data - Time         : 2025-05-08 08:56:42
Stream data - HTTP request : 202 Accepted

The following example connects an ICX device to ICX-Management in SmartZone.

ICX# manager connect

ICX# show manager status

SYSLOG: <14> May 08 08:45:00 ICX CLI CMD: "show manager status" by super user from console
============    MGMT Agent State Info     ===================

Manager mode: SZ
Config Status:Enabled Operation Status:Enabled
State:SSH CONNECTED  Prev State:SSH CONNECTING   Event:SZ_SSH_CONNECT_EVENT
 
BSICLOUD Status         : Disabled
 
SWR Host                : sw-registrar.ruckuswireless.com
SWR List                : None
SWR fqdn                : None
DNS List                : None
 
Active FQDN List        : None
Backup FQDN List        : None
Active List             : 10.177.19.14
Backup List             : None
Active List IPV6        : 2001:df3:80d:826f::114
Backup List IPV6        : None
DHCP Option 43          : No
DHCP Opt 43 List        : None
DHCPV6 LIST             : None
Merged List             : 10.177.19.14 2001:df3:80d:826f::114
SZ IP Used              : 10.177.19.14
Port List               : None
Server Port Used        : 443                                     
Query Status            : APPROVED
 
SSH Tunnel Status -:
Tunnel Status             : Established
SSH Port                  : 22
CLI IP/Port               : 127.255.255.253/57316
SNMP IP/Port              : 127.255.255.254/10825
Syslog IP/Port            : 127.0.0.1/20514
HTTP CLIENT IP/Port       : 127.255.255.252/36431
HTTP SERVER IP/Port       : 127.0.0.1/5080
History
Release version Command history
08.0.92 This command was introduced.
09.0.10h, 10.0.10b This command can also be configured in global configuration mode.
Parent topic: Commands M