show ip bgp ipv6

Displays IPv6 unicast information.
Syntax
show ip bgp ipv6 neighbors
show ip bgp ipv6 neighbors ip-addr advertised-routes [ detail ] [ ipv6 address /mask ]
show ip bgp ipv6 neighbors ip-addr flap-statistics
show ip bgp ipv6 neighbors ip-addr last-packet-with-error [ decode ]
show ip bgp ipv6 neighbors ip-addr received [ prefix-filter ]
show ip bgp ipv6 neighbors ip-addr received-routes [ detail ]
show ip bgp ipv6 neighbors ip-addr rib-out-routes [ detail ] [ ipv6 address /mask ]
show ip bgp ipv6 neighbors ip-addr routes
show ip bgp ipv6 neighbors ip-addr routes { best | not-installed-best | unreachable }
show ip bgp ipv6 neighbors ip-addr routes detail { best | not-installed-best | unreachable }
show ip bgp ipv6 neighbors ip-addr routes-summary
show ip bgp ipv6 neighbors last-packet-with-error
show ip bgp ipv6 neighbors routes-summary
show ip bgp ipv6 summary
Parameters
neighbors
Specifies a neighbor.
ip-addr
IPv4 address of a neighbor in dotted-decimal notation.
advertised-routes
Specifies the routes that the device has advertised to the neighbor during the current BGP4 session.
detail
Specifies detailed information.
ipv6 address /mask
Specifies an IPv6 address and mask.
flap-statistics
Specifies the route flap statistics for routes received from or sent to a BGP4 neighbor.
last-packet-with-error
Specifies the last packet with an error.
decode
Decodes the last packet that contained an error from any of a device's neighbors.
received
Specifies Outbound Route Filters (ORFs) received from BGP4 neighbors of the device.
prefix-filter
Displays the results for ORFs that are prefix-based.
received-routes
Specifies all route information received in route updates from BGP4 neighbors of the device since the soft-reconfiguration feature was enabled.
rib-out-routes
Displays information about the current BGP4 Routing Information Base (Adj-RIB-Out) for specific neighbors and specific destination networks.
routes
Displays a variety of route information received in UPDATE messages from BGP4 neighbors.
best
Displays routes received from the neighbor that are the best BGP4 routes to their destination.
not-installed-best
Displays routes received from the neighbor that are the best BGP4 routes to their destination but were not installed in the route table because the device received better routes from other sources.
unreachable
Displays routes that are unreachable because the device does not have a valid RIP, OSPF, or static route to the next hop.
routes-summary
Displays all route information received in UPDATE messages from BGP4 neighbors.
summary
Displays summarized IPv6 unicast information.
Modes

User EXEC mode

Examples

The following example displays summarized IPv6 unicast information. 

device> show ip bgp ipv6 summary
BGP4 Summary
Router ID: 10.1.1.1 Local AS Number: 1
Confederation Identifier: not configured
Confederation Peers:
Maximum Number of IP ECMP Paths Supported for Load Sharing: 1
Number of Neighbors Configured: 1, UP: 1
Number of Routes Installed: 1, Uses 86 bytes
Number of Routes Advertising to All Neighbors: 0 (0 entries)
Number of Attribute Entries Installed: 1, Uses 90 bytes
Neighbor Address AS# State Time Rt:Accepted Filtered Sent ToSend
192.168.1.2 2 ESTAB 0h 1m51s 1 0 0 0

The following example displays IPv6 unicast device information with respect to IPv4 neighbors. 

device(config-bgp)# show ip bgp ipv6 neighbors
Total number of BGP Neighbors: 1
1 IP Address: 192.168.1.2, AS: 2 (EBGP), RouterID: 10.1.1.2, VRF: default-vrf
State: ESTABLISHED, Time: 0h8m33s, KeepAliveTime: 60, HoldTime: 180
KeepAliveTimer Expire in 17 seconds, HoldTimer Expire in 135 seconds
UpdateSource: Loopback 1
RefreshCapability: Received
.......
Neighbor NLRI Negotiation:
Peer Negotiated IPV6 unicast capability
Peer configured for IPV6 unicast Routes
Neighbor AS4 Capability Negotiation:
TCP Connection state: ESTABLISHED, flags:00000033 (0,0)
History
Parent topic: Show Commands