`radius-server dead-time`

Configures the interval at which the test user message is sent to the server to check the status of non-responding servers that are marked as dead.

Syntax

radius-server dead-time time

no radius-server dead-time time

Command Default

RADIUS dead time is not enabled.

Parameters

time: The time interval between successive server requests to check the availability of the RADIUS server in minutes. The valid values are from 1 through 5 minutes.

Modes

Global configuration mode

Usage Guidelines

The no form of the command removes the dead time interval.

Examples

The following example configures the RADIUS server dead time as four minutes.

device(config)# radius-server deadtime 4

radius-server dead-time