`member-vlan (STP)`

Adds member VLANs to the STP group.

Syntax

member-vlan vlan-id [ to vlan-id | [ vlan-id to vlan-id | vlan-id]... ]

no member-vlan vlan-id [ to vlan-id | [ vlan-id to vlan-id | vlan-id]... ]

Command Default

Member VLANs are not added to the STP group.

Parameters

Modes

STP group configuration mode

Usage Guidelines

The member VLAN group must be configured before adding it to the STP group.

All the VLANs in the member group inherit the STP settings of the master VLAN in the group.

The no form of the command removes the member VLANs from the STP group.

Examples

The following example adds the member VLANs to the STP group.

device(config)# stp-group 2
device(config-stp-group-2)# member-vlan 4
device(config-stp-group-2)# member-vlan 5

member-vlan (STP)