show vrf

Displays IP information for the specified Virtual Routing and Forwarding (VRF).
Syntax
show vrf [ vrf-name | detail | resource [ detail ] ]
Parameters
vrf-name
Specifies the VRF for which you want to display the information.
detail
Displays detailed VRF instance information. When used along with the resource keyword, displays detailed resource information.
resource
Displays resources used by all VRFs.
Modes

User EXEC mode

Privileged EXEC mode

Global configuration mode

Interface configuration mode

VRF configuration mode

The show vrf command displays the following information.

Output field Description
VRF vrf-name The name of the VRF.
default RD The default route distinguisher for the VRF.
Table ID The table ID for the VRF.
Routes The total number of IPv4 and IPv6 unicast routes configured on this VRF.
Configured as management-vrf Indicates that the specified VRF is configured as a management VRF.
IP Router-Id The 32-bit number that uniquely identifies the router.
Number of Unicast Routes The number of unicast routes configured on this VRF.
Examples

The following is sample output from the show vrf vrf-name command. 

device(config)# show vrf mvrf

VRF mvrf, default RD 1100:1100, Table ID 11
Configured as management-vrf
IP Router-Id: 10.0.0.1
Interfaces:
ve3300 ve3400
Address Family IPv4
Max Routes: 641
Number of Unicast Routes: 2
Address Family IPv6
Max Routes: 64
Number of Unicast Routes: 2
Parent topic: Show Commands