ip mroute (Next Hop)
Configures a static IPv4 multicast route (mroute) with a next hop..
Syntax
ip mroute
[
vrf
vrf-name
]
ip-address
ip-address mask
next-hop address
[
cost
]
[
distance
distance-value
]
[
name
name
]
no ip mroute
[
vrf
vrf-name
]
ip-address
ip-address mask
next-hop address
[
cost
]
[
distance
distance-value
]
[
name
name
]
Command Default
No next-hop static IPv4 multicast route is configured.
Parameters
- ip-address ip-address mask
- Configures the destination IPv4 address and prefix for which the route should be added.
- cost
- Configures a metric for comparing the route to other static routes in the static route table that have the same destination. The range is 1-16; the default is 1.
- distance distance-value
- Configures the route's administrative distance. The range is 1 through 255; the default is 1.
Modes
VRF configuration mode
Usage Guidelines
The
no form of this command deletes a previously configured next-hop static IPv4 multicast
route.
Examples
The following example configures a next-hop static multicast IPv4 route to network 10.1.1.0/24 with next hop 10.2.1.1.
Device(config-vrf)# ip mroute 10.1.1.0 255.255.255.0 10.2.1.1
History
| Release version | Command history |
|---|---|
| 08.0.10a | This command was introduced. |