manager query

Initiates a query to a specific ICX-Management IP address if ICX-Management is not yet connected.
Syntax
manager query ip-address
Command Default

A query is not initiated.

Modes

Privileged EXEC mode

Global configuration mode

Parameters
ip-address
The ICX-Management IP address to which the troubleshooting query is sent.
Usage Guidelines

The manager query command is used for troubleshooting. The command can be used only when the ICX switch is already connected or when ICX-Management is in a disabled state. If the ICX switch is already in the process of connecting to ICX-Management, the manager query command does not work.

Examples

The following example shows a query sent by an ICX device. 

device> manager query 104.198.196.69 
Sending TA Request to IP: 104.198.196.69 Request POST URL: /switchm/api/v1/switch/auth/DUH3827L069 
Response might take up to few mins... 
Mar 29 22:41:32 Initiating HTTP POST Request... 
Mar 29 22:41:38 HTTP Request Succeed for Request ID: 2. Response Code: 200 
Received Buffer: 
    <Received JSON Payload>
History
Release version Command history
08.0.80 The command was introduced as sz query.
08.0.92 The command name was changed to manager query.
09.0.10h, 10.0.10b The command can also be configured in global configuration mode.
Parent topic: Commands M