ip igmp port-version
Configures an IGMP version recognized by a physical port that is a member of a virtual
routing interface.
Syntax
ip igmp port-version
version-number
ethernet
unit/slot/port
[
to
ethernet
unit/slot/port[
ethernet
unit/slot/port...
]
]
no ip igmp port-version
version-number
ethernet
unit/slot/port
[
to
ethernet
unit/slot/port[
ethernet
unit/slot/port..
]
]
Command Default
IGMP Version 2 is enabled.
Parameters
Modes
Interface configuration mode
Usage Guidelines
The
no form of this command restores the default; IGMP Version 2 is enabled.
Examples
The following example enables IGMP Version 3 on a physical port that is a member of a virtual routing interface. It first enables IGMP Version 2 globally, then enables Version 3 on ports 1/1/3 through 1/1/7 and port 1/2/9. All other ports in this virtual routing interface are configured with IGMP Version 2.
device(config)#interface ve 3 device(config-vif-3)# ip igmp version 2 device(config-vif-3)# ip igmp port-version 3 ethernet 1/1/3 to ethernet 1/1/7 ethernet 1/2/9