`captive-portal profile`

Applies a configured Captive Portal profile on a Web Authentication-enabled VLAN.

Syntax

captive-portal profileprofile-name

no captive-portal profileprofile-name

Command Default

A Captive Portal profile is not applied on a Web Authentication-enabled VLAN.

Parameters

profile-name: Specifies the Captive Portal profile to be applied on a Web Authentication-enabled VLAN.

Modes

Web Authentication configuration mode

Usage Guidelines

The captive portal profile name must not exceed 32 characters in length.

The no form of the command removes the Captive Portal profile from the Web Authentication-enabled VLAN.

Examples

The following example binds the Captive Portal profile cp_ruckus on Web Authentication-enabled VLAN 10.

device(config)# vlan 10
device(config-vlan-10)# webauth
device(config-vlan-10-webauth)# captive-portal profile cp_ruckus

History

Release version	Command history
08.0.40	This command was introduced.
08.0.30j	This command was added to FastIron 08.0.30j.

captive-portal profile