group-router-interface

Creates router interfaces for each VLAN in the VLAN group.
Syntax
group-router-interface
no group-router-interface
Command Default

A group router interface is not configured.

Modes

VLAN group configuration mode

Usage Guidelines

The group-router-interface command creates router interfaces for each VLAN in the VLAN group by using the VLAN IDs of each of the VLANs as the corresponding virtual interface number. This command enables a VLAN group to use a virtual routing interface group. You can enter this command when you configure the VLAN group for the first time or later, after you have added tagged ports to the VLAN, and so on.

If a VLAN group contains VLAN IDs greater than the maximum virtual interface number allowed, the group-router-interface command will be rejected.

The no form of the command disables the VLAN group router interface.

Examples

The following example shows how to create a router interface for a VLAN. 

device(config)# vlan-group 1 vlan 10
device(config-vlan-group-1)# group-router-interface
Parent topic: Commands D through H