rapid-commit (DHCPv6)

Configures the DHCPv6 Rapid Commit option (DHCPv6 option 14) for the DHCPv6 server for faster IPv6 prefix delegation.
Syntax
rapid-commit
no rapid-commit
Command Default

The DHCPv6 Rapid Commit option is not configured.

Modes

DHCPv6 server configuration mode

Usage Guidelines

To use this command, you must upgrade to FastIron 08.0.90 using the Unified FastIron Image (UFI). Refer to the “Software Upgrade and Downgrade” chapter in the RUCKUS FastIron Software Upgrade Guide for more information.

The no form of the command restores the default.

Examples

The following example configures the Rapid Commit option for the DHCPv6 server. 

device# configure terminal
device(config)# ipv6 dhcp6-server enable
device(config-dhcp6)# rapid-commit
History
Release version Command history
08.0.90 This command was introduced.
Parent topic: Commands O, P, Q, R, and Sa through Sh