ip vrrp-extended vrid

Configures an IPv4 Virtual Router Redundancy Protocol Extended (VRRP-E) virtual router identifier (VRID).
Syntax
ip vrrp-extended vrid vrid
no ip vrrp-extended vrid vrid
Command Default

A VRRP-E VRID does not exist.

Parameters
vrid
Configures a number for the IPv4 VRRP-E VRID. The range is from 1 through 255.
Modes

Interface configuration mode

Usage Guidelines

Before configuring this command, ensure that VRRP-E is enabled globally; otherwise an error stating "Invalid input..." is displayed as you try to create a VRRP-E instance.

The no form of this command removes the IPv4 VRRP-E VRID from the configuration.

Examples

The following example configures VRRP-E VRID 1. 

device# configure terminal
device(config)# router vrrp-extended
device(config-vrrpe-router)# interface ethernet 1/1/6
device(config-if-e1000-1/1/6)# ip address 10.53.10.1/24
device(config-if-e1000-1/1/6)# ip vrrp-extended vrid 1
device(config-if-e1000-1/1/6-vrid-1)# backup priority 50 track-priority 10
device(config-if-e1000-1/1/6-vrid-1)# ip-address 10.53.10.254
device(config-if-e1000-1/1/6-vrid-1)# activate
Parent topic: Commands I