lldp enable transmit
lldp enable transmit
ports
{
all
| [
ethernet
unit/slot/port
[
to
unit/slot/port
]
... ]
}
no lldp enable transmit
ports
{
all
| [
ethernet
unit/slot/port
[
to
unit/slot/port
]
... ]
}
When LLDP is enabled on a global basis, each port on the device is capable of transmitting and receiving LLDP packets.
Global configuration mode
You can specify a list of ports, separated by a space, or a range of ports, or you can combine lists and ranges.
The command cannot support LAG virtual interfaces. Attempting to configure them will have no effect.
The
no form of the command changes the LLDP operating mode to receive-only mode if the device
is in both transmit and receive mode, and it disables the LLDP transmit-only operating
mode if transmit-only mode was enabled.