client-auto-detect ethernet

Enables cluster client automatic configuration on a specific port or range of ports.
Syntax
client-auto-detect ethernet stackid/slot/port [ to stackid/slot/port | [ ethernet stackid/slot/port to stackid/slot/port | ethernet stackid/slot/port ] ... ]
no client-auto-detect ethernet stackid/slot/port [ to stackid/slot/port | [ ethernet stackid/slot/port to stackid/slot/port | ethernet stackid/slot/port ] ... ]
Command Default

Cluster client automatic configuration is not enabled on the ports.

Parameters
ethernet stackid/slot/port
Specifies the Ethernet port on which you want to enable the cluster client automatic configuration.
to stackid/slot/port
Specifies the range of ports on which you want to enable the cluster client automatic configuration.
Modes

Cluster configuration mode

Usage Guidelines

The no form of the command disables the cluster client automatic configuration on the ports.

Examples

The following example shows how to enable cluster client automatic configuration on an Ethernet port. 

device(config)# cluster SX 400
device(config-cluster-SX)# client-auto-detect ethernet 1/1/15

The following example shows how to enable cluster client automatic configuration on a range of ports. 

device(config)# cluster SX 400
device(config-cluster-SX)# client-auto-detect ethernet 1/1/15 to 1/1/18
Parent topic: Commands C