pool (DHCPv6)

Configures a DHCPv6 server pool.
Syntax
pool string
no pool string
Command Default

By default the DHCPv6 server pool, dhcp6_pool, is configured on the system if no DHCPv6 server pool is configured, and is valid on the configured subnet on the server.

Modes

DHCPv6 server configuration mode

Usage Guidelines

To use this command, you must upgrade to FI 08.0.90 using the Unified FastIron Image (UFI). Refer to the “Software Upgrade and Downgrade” chapter in the RUCKUS FastIron Software Upgrade Guide for more information.

The no form of the command removes a configured DHCPv6 server pool and removes all subnets that are part of the current pool.

Examples

The following example configures a DHCPv6 server pool “test_pool”. 

device# configure terminal
device(config)# ipv6 dhcp6-server enable
device(config-dhcp6)# pool test_pool
History
Release version Command history
08.0.90b This command was introduced.
Parent topic: Commands O, P, Q, R, and Sa through Sh