show ikev2 policy

Displays configuration information about Internet Key Exchange version 2 (IKEv2) policies.
Syntax
show ikev2 policy [ policy-name ]
Parameters
policy-name
Specifies the name of an IKEv2 policy.
Modes

User EXEC mode

Usage Guidelines

This command may be entered in all configuration modes.

When a policy is not specified, this command displays information about all IKEv2 policies.

The show ikev2 policy command displays the following information:

Output field Description
Name The name of an IKEv2 policy.
vrf The front-door VRF (fvrf) to match for the policy.
Local address/Mask The local IP address to match for the policy.
Proposal The IKEv2 proposal that is configured for the policy.
Ref Count The number of IPsec profiles that refer to this IKEv2 policy.
Examples

The following example displays information about all configured IKEv2 policies. 

device# show ikev2 policy

   Name                : ike_policy_red
   vrf                 : any
   Local address/Mask  : 0.0.0.0/0.0.0.0   
   Proposal            : ike_proposal_red
   Ref Count           : 0

   Name                : def-ike-policy
   vrf                 : any
   Proposal            : def-ike-prop
   Ref Count           : 0
History
Release version Command history
08.0.50 This command was introduced.
Parent topic: Show Commands