lsdb-overload-interval

Configures the period of time that must pass before a router checks the link state database (LSDB) overflow state.
Syntax
lsdb-overload-intervalinterval
no lsdb-overload-intervalinterval
Command Default

The router checks the LSDB overflow state every 600 seconds.

Parameters
interval

Specifies the interval in seconds. Valid values range from 0 through 86400. The default is 600 seconds.

Modes

OSPF router configuration mode

OSPFv3 router configuration mode

Usage Guidelines

The no form of the command restores the default value.

Examples

The following example configures the router to check the LSDB overflow state every 900 seconds for OSPFv2. 

device# configure terminal
device(config)# router ospf
device(config-ospf-router)# lsdb-overload-interval 900

The following example configures the router to check the LSDB overflow state every 450 seconds for OSPFv3. 

device# configure terminal
device(config)# ipv6 router ospf
device(config-ospf6-router)# lsdb-overload-interval 450
History
Release version Command history
08.0.95 This command was introduced.
Parent topic: Commands J, K, and L