show bfd sessions

Displays information about Bidirectional Forwarding Detection (BFD) sessions.
Syntax
show bfd sessionssession-id[hw]
show bfd sessionsinterfaceethernetunit/slot/port[details][ip-address|ipv6-address]
show bfd sessionsinterfacevevlan_id[details][ip-address|ipv6-address]
show bfd sessionsipv4all
show bfd sessionsipv6all
Parameters
session-id
Specifies a BFD session.
hw
Specifies the session information from the micro-controller.
interface
Specifies BFD sessions for an interface.
ethernetunit/slot/port
Specifies an Ethernet interface.
details
Specifies detailed information.
ip-address
Specifies an IP address.
ipv6-address
Specifies an IPv6 address.
vevlan_id
Specifies the VLAN number.
ipv4all
Specifies all IPv4 sessions.
ipv6all
Specifies all IPv6 sessions.
Modes

User EXEC mode

Usage Guidelines

This command is supported for ICX 7850 devices only.

Examples

The following example shows information about all IPv4 BFD sessions. 

device> show bfd sessions ipv4 all

Flags: H:Hop [S:Single/M:Multi] P:Passive-Mode M:Micro-BFD R:RxRemote [Y:Yes/N:No]
MinTx/MinRx/NegTx/NegRx/DTime [milliseconds]  HoldTime [seconds]
Total Neighbors in VRF [All]: 2 A-DOWN:0 DOWN:0 INIT:0 UP:2

Id  Neighbor          Local             State  NHopIntf   NegRx|NegTx|DTime    P/H/M/R    vrf
--  --------          -----             -----  --------   -----------------    ------- ---------
1   20.20.20.1        10.10.10.1        UP     1/1/13     300   300   900      N/M/N/Y default-vrf
2   40.40.40.1        30.30.30.1        UP     1/1/14     300   300   900      N/M/N/Y white
History
Release version Command history
08.0.90 This command was introduced.
Parent topic: Show Commands