disable authentication md5

Disables the MD5 authentication scheme for Network Time Protocol (NTP).
Syntax
disable authentication md5
no disable authentication md5
Command Default

If JITC is enabled, the MD5 authentication scheme is disabled. In the standard mode, the MD5 authentication scheme is enabled.

Modes

Global configuration mode

Usage Guidelines

In the standard mode, both SHA1 and MD5 authentication schemes are supported. If JITC is enabled, The MD5 authentication for Network Time Protocol (NTP) is disabled by default and the disable authentication md5 command can be seen in the running configuration. In the JITC mode, only the SHA1 option is available. The SHA1 authentication scheme must be enabled manually to define the authentication key for NTP using the authentication-key key-id command.

The no form of the command enables the MD5 authentication scheme.

Examples

The following example disables the MD5 authentication scheme. 

device(config)# disable authentication md5
History
Release version Command history
08.0.20a This command was introduced.
Parent topic: Commands D through H