ipv6 load-sharing

Enables Equal-cost multi-path routing (ECMP) load sharing for IPv6.
Syntax
ipv6 load-sharing [ num ]
no ipv6 load-sharing [ num ]
Command Default

ECMP load-sharing for IPv6 is enabled and allows traffic to be balanced across up to four equal paths.

Parameters
num
Specifies the number of load-sharing paths. The value can range from 2 through 8. The default value is 4.
Modes

Global configuration mode

Usage Guidelines

If you want to re-enable the feature after disabling it, you must specify the number of load-sharing paths.

The no form of the command sets the load-sharing path to the default value of 4.

Examples

The following example sets the number of ECMP load-sharing paths for IPv6 to 6. 

device(config)# ipv6 load-sharing 6
Parent topic: Commands I