neighbor soft-reconfiguration inbound
Stores all the route updates received from a BGP neighbor.
Syntax
neighbor
{
ip-address
|
ipv6-address
|
peer-group-name
}
soft-reconfiguration
inbound
no neighbor
{
ip-address
|
ipv6-address
|
peer-group-name
}
soft-reconfiguration
inbound
Parameters
Modes
BGP configuration mode
BGP address-family IPv4 unicast VRF configuration mode
BGP address-family IPv6 unicast VRF configuration mode
Usage Guidelines
Soft reconfiguration stores all the route updates received from a neighbor. If you request a soft reset of inbound routes, the software compares the policies against the stored route updates, instead of requesting the neighbor’s BGP4 or BGP4+ route table or resetting the session with the neighbor.
Examples
The following example globally stores route updates from a BGP4 neighbor.
device# configure terminal device(config)# router bgp device(config-bgp-router)# neighbor 10.11.12.13 soft-configuration inbound
History
| Release version | Command history |
|---|---|
| 08.0.30 | Support was added for the BGP address-family IPv6 unicast VRF configuration mode. |