`netbios-proto`

Configures the NetBIOS protocol-based VLAN and enters NetBIOS protocol VLAN configuration mode.

Syntax

netbios-proto [ name string ]

no netbios-proto [ name string ]

Command Default

An NetBIOS protocol-based VLAN is not configured.

Parameters

name string: Specifies the name of the NetBIOS protocol configuration. The name can be up to 32 characters in length.

Modes

VLAN configuration mode

IP protocol VLAN configuration mode

IPX protocol VLAN configuration mode

IPv6 protocol VLAN configuration mode

DECnet protocol VLAN configuration mode

AppleTalk protocol VLAN configuration mode

Other protocol VLAN configuration mode

Usage Guidelines

The no form of the command disables the NetBIOS protocol-based VLANs.

Examples

The following example shows how to configure the NetBIOS protocol-based VLAN.

device(config)# ipx-proto name Brown
device(config-vlan-ipx-proto)# netbios-proto name proto1
device(config-vlan-netbios-proto)# no dynamic

netbios-proto