destination-ip

Sets the destination IP address of an Encapsulated Remote Switched Port Analyzer (ERSPAN) mirror.
Syntax
destination-ip ip-addr
no destination-ip ip-addr
Command Default

A destination IP is not configured for the ERSPAN profile.

Parameters
ip-addr
Specifies the IP address in the format A.B.C.D.
Modes

Monitor profile mode

Usage Guidelines

The destination IP address is the IP address for the remote host that is collecting the mirrored traffic, not the switch.

ERSPAN is not supported for RUCKUS ICX 7150, ICX 7150-ES, and ICX 8100 devices.

The no form of the command removes the IP address from the monitor profile.

Examples

The following example sets the destination IP address in ERSPAN profile 3. 

device# configure terminal
device(config)# monitor-profile 3 type ERSPAN
device(config-monitor-profile 3)# destination-ip 1.1.1.1
device(config-monitor-profile 3)# exit
History
Release version Command history
08.0.40 This command was introduced.
10.0.10h_cd1 This command is supported for ICX 8200 devices.
Parent topic: Commands D through H