dot1x guest-vlan
Specifies the VLAN into which the port should be placed when the client's response
to the dot1x requests for authentication times out.
Command Default
The guest VLAN ID is not specified.
Parameters
Modes
dot1x configuration mode
Usage Guidelines
The no form of this command disables the functionality.
Use this command when the client does not support the 802.1X authentication, so that the client can access default privileges.
If there is no response from dot1x client for EAP-packets and if guest VLAN is not configured, authentication is considered as failed and the configured failure action is performed.
History
| Release version | Command history |
|---|---|
| 08.0.20 | This command was introduced. |