show cluster
Displays information about MCT clusters.
Syntax
show cluster
[
cluster-id
|
cluster-name
]show cluster
{
cluster-id
|
cluster-name
}
[
client-auto-detect
]
[
config
]show cluster
{
cluster-id
|
cluster-name
}
[
802-1w
|
span
]
[
detail
]
[
vlan-id
]show cluster
{
cluster-id
|
cluster-name
}
ccp
[
buffered_messages
|
client
[
client-name
|
client-rbridgeid
]
|
peer
[
ip-address
]
[
detail
]show cluster
{
cluster-id
|
cluster-name
}
client
[
client-name
|
client-rbridgeid
]show cluster
{
cluster-id
|
cluster-name
}
peer
[
ip-address
]
[
detail
]Parameters
Modes
User EXEC mode
Usage Guidelines
Use this command without any options to display general cluster information.
Examples
The following example displays sample output of the
show cluster command for cluster MgM 3000.
device# show cluster MgM 3000
Cluster MgM 3000
=============
Rbridge Id: 3, Session Vlan: 3000, Keep-Alive Vlan: 3001
Cluster State: Deploy
Client Isolation Mode: Loose
Member Vlan Range:
MCT Peer's Reachability using Keep-Alive Vlan: Peer Unreachable
ICL Info:
---------
Name Port Trunk
MgM-MCT lg1 1
Peer Info:
----------
Peer IP: 1.1.1.2, Peer Rbridge Id: 2, ICL: MgM-MCT
KeepAlive Interval: 10 , Hold Time: 90, Fast Failover
Active Vlan Range:
Last Reason for CCP Down: Image version doesn't match with peer
Peer State: CCP Down (CCP is Down)
Reason for CCP Down: Image version doesn't match with peer
Sequence Number Sent: 274
Sequence Number Received: 0
Number of Out-Of-Sequence Packets Received: 0
Client Info:
------------
Number of Clients configured: 1
Name Rbridge-id Config Port Trunk FSM-State
ttt 30 Undeployed - -
The following example displays sample output of the
show cluster config command for cluster SXR122.
device# show cluster SXR122 config cluster SXR122 100 rbridge-id 100 session-vlan 1 keep-alive-vlan 3 icl SXR122-MCT ethernet 1/1/1 peer 172.17.0.2 rbridge-id 101 icl SXR122-MCT deploy client KL134 rbridge-id 14 client-interface ethernet 1/1/23 deploy client AGG131 rbridge-id 10 client-interface ethernet 1/2/2 deploy client FOX135 rbridge-id 15 client-interface ethernet 1/2/5 deploy
The following example displays sample output of the
show cluster client command.
device# show cluster 1 client Cluster 1 1 =================== Rbridge Id: 101, Session Vlan: 3999, Keep-Alive Vlan: 4001 Cluster State: Deploy Client Isolation Mode: Loose Configured Member Vlan Range: 100 to 105 Active Member Vlan Range: 100 to 105 MCT Peer's Reachability status using Keep-Alive Vlan: Peer Reachable Client Info: ------------ Client: c1, rbridge-id: 300, Deployed Client Port: 3/11 State: Up Number of times Local CCEP down: 0 Number of times Remote CCEP down: 0 Number of times Remote Client undeployed: 0 Total CCRR packets sent: 4 Total CCRR packets received: 3
The following example displays sample output of the
show cluster command displaying information for the
ccp and
peer options.
device# show cluster 1 ccp peer ... PEER IP ADDRESS STATE UP TIME --------------- ------------- -------------- 10.1.1.1 OPERATIONAL 0 days: 2 hr:25 min:16 sec
The following example displays sample detailed output of the
show cluster command for the
ccp and
peer options:
device# show cluster 1 ccp peer detail
**************Peer Session Details*********************
IP address of the peer 10.1.1.1
Rbridge ID of the peer 100
Session state of the peer OPERATIONAL
Next message ID to be send 287
Keep Alive interval in seconds 30
Hold Time Out in seconds 90
Fast Failover is enable for the session
UP Time 0 days: 2 hr:22 min:58 sec
Number of tcp packet allocations failed 0
Message Init Keepalive Notify Application Badmessages
Send 3 2421 2 53 0
Receive 3 2415 0 37 0
TCP connection is up
TCP connection is initiated by 10.1.1.2
TCP connection tcbHandle not pending
TCP connection packets not received
**************TCP Connection Details*********************
TCP Connection state: ESTABLISHED Maximum segment size: 1436
Local host: 10.1.1.2, Local Port: 12203
Remote host: 10.1.1.1, Remote Port: 4175
ISentSeq: 1867652277 SendNext: 1867660731 TotUnAck: 0
TotSent: 8454 ReTrans: 9 UnAckSeq: 1867660731
IRcvSeq: 3439073167 RcvNext: 3439078415 SendWnd: 16384
TotalRcv: 5248 DupliRcv: 16 RcvWnd: 16384
SendQue: 0 RcvQue: 0 CngstWnd: 1452
The following example displays sample output of the
show cluster command displaying updated information to indicate that the reason for the CCP down
may be caused by a board type mismatch. The updated text is highlighted in bold. This
example is only applicable to the Ruckus ICX 7850 platform running a FastIron 08.0.90
image.
device# show cluster Cluster MgM 3000 ============= Rbridge Id: 3, Session Vlan: 3000, Keep-Alive Vlan: 3001 Cluster State: Deploy Client Isolation Mode: Loose Member Vlan Range: MCT Peer's Reachability using Keep-Alive Vlan: Peer Unreachable ICL Info: --------- Name Port Trunk MgM-MCT lg1 1 Peer Info: ---------- Peer IP: 1.1.1.2, Peer Rbridge Id: 2, ICL: MgM-MCT KeepAlive Interval: 10 , Hold Time: 90, Fast Failover Active Vlan Range: Last Reason for CCP Down: Image version or board type doesn't match with peer Peer State: CCP Down (CCP is Down) Reason for CCP Down: Image version or board type doesn't match with peer Sequence Number Sent: 104 Sequence Number Received: 0 Number of Out-Of-Sequence Packets Received: 0 Client Info: ------------ Number of Clients configured: 1 Name Rbridge-id Config Port Trunk FSM-State ttt 30 Undeployed - -
The following example indicates that the CCP is down because of a software image mismatch with its peer.
device# show cluster Cluster mct_mm_stk 1000, version 2 ==================== Rbridge Id: 1029, Session Vlan: 1000, Keep-Alive Vlan: 1999 Cluster State: Deploy Client Isolation Mode: Loose Member Vlan Range: 1001 to 1002 3001 to 3150 MCT Peer's Reachability using Keep-Alive Vlan: Peer Reachable ICL Info: --------- Name Port Trunk icl_mm lg1 1 Peer Info: ---------- Peer IP: 11.1.1.1, Peer Rbridge Id: 1019, ICL: icl_mm KeepAlive Interval: 30 , Hold Time: 90, Fast Failover Active Vlan Range: Last Reason for CCP Down: Image version doesn't match with peerPeer State: Reachable (CCP is Down) Reason for CCP Down: Image version doesn't match with peer Sequence Number Sent: 1440 Sequence Number Received: 1421 Number of Out-Of-Sequence Packets Received: 0 Client Info: ------------ Number of Clients configured: 3 Name Rbridge-id Config Port Trunk FSM-State C1 3 Deployed lg3 3 Master Peer Reachabl C2 4 Deployed lg4 4 Slave c101 101 Deployed lg101 101 Slave device# show cluster Cluster mct_mm_stk 1000, version 2 ==================== Rbridge Id: 1029, Session Vlan: 1000, Keep-Alive Vlan: 1999 Cluster State: Deploy Client Isolation Mode: Loose Member Vlan Range: 1001 to 1002 3001 to 3150 MCT Peer's Reachability using Keep-Alive Vlan: Peer Reachable ICL Info: --------- Name Port Trunk icl_mm lg1 1 Peer Info: ---------- Peer IP: 11.1.1.1, Peer Rbridge Id: 1019, ICL: icl_mm KeepAlive Interval: 30 , Hold Time: 90, Fast Failover Active Vlan Range: Last Reason for CCP Down: Image version doesn't match with peer Peer State: Reachable (CCP is Down) Reason for CCP Down: Image version doesn't match with peer Sequence Number Sent: 1445 Sequence Number Received: 1426 Number of Out-Of-Sequence Packets Received: 0 Client Info: ------------ Number of Clients configured: 3 Name Rbridge-id Config Port Trunk FSM-State C1 3 Deployed lg3 3 Master Peer Reachabl C2 4 Deployed lg4 4 Slave c101 101 Deployed lg101 101 Slave
History