dhcp snooping relay information remote-id

Configures a unique remote ID per port.
Syntax
dhcp snooping relay information remote-id ASCII-string
no dhcp snooping relay information remote-id ASCII-string
Parameters
ASCII-string
Specifies the ASCII-string. The string can be up to 63 characters in length.
Modes

Interface configuration mode

Usage Guidelines

The no form of the command disables the remote ID processing once it is enabled.

Use the show interfaces ethernet command to view the remote ID configured on a port.

Examples

The following example enables the remote ID per port. 

device(config)# ip dhcp snooping vlan 1
device(config)# interface ethernet 1/1/4
device(config-if-e1000-1/1/4)# dhcp snooping relay information remote-id remote01
History
Release version Command history
08.0.50 This command was introduced.
Parent topic: Commands D through H