ipv6 dhcp6-server enable

Enables the DHCPv6 server globally.
Syntax
ipv6 dhcpv6-server enable
no ipv6 dhcpv6-server enable
Command Default

The DHCPv6 server is not enabled.

Modes

Global configuration mode

Usage Guidelines

To use this command, you must upgrade to FI 08.0.90 using the Unified FastIron Image (UFI). Refer to the Software Upgrade and Downgrade chapter in the RUCKUS FastIron Software Upgrade Guide for more information. The no form of the command disables the DHCPv6 server globally.

Examples

The following example enables the DHCPv6 server globally. 

device# configure terminal
device(config)# ipv6 dhcp6-server enable
device(config-dhcp6)#
History
Release version Command history
08.0.90 This command was introduced.
Parent topic: Commands I