lldp enable snmp med-topo-change-notifications
lldp enable snmp med-topo-change-notifications
ports
{
all
| [
ethernet
unit/slot/port
[
to
unit/slot/port
]
... ]
}
no lldp enable snmp med-topo-change-notifications
ports
{
all
| [
ethernet
unit/slot/port
[
to
unit/slot/port
]
... ]
}
SNMP notifications and corresponding syslog messages are disabled.
Global configuration mode
When you enable LLDP-MED SNMP notifications, corresponding syslog messages are enabled as well. When you enable LLDP-MED SNMP notifications, the device sends traps and syslog messages when an LLDP-MED endpoint neighbor entry is added or removed.
You can specify a list of ports, separated by a space, or a range of ports, or you can combine lists and ranges.
The command cannot support LAG virtual interfaces. Attempting to configure them will have no effect.
The
no form of the command disables LLDP-MED SNMP notifications and syslog messages.