ip hitless-route-purge-timer

Configures the timer to set the duration for which the routes should be preserved after switchover.
Syntax
ip hitless-route-purge-timer seconds
no ip hitless-route-purge-timer seconds
Command Default

The default timer setting is 45 seconds.

Parameters
seconds
Specifies the time after switchover to start IPv4 route purge. The value can range from 2 to 600 seconds.
Modes

Global configuration mode

Usage Guidelines

The no form of the command removes the configured value and sets the timer to the default 45 seconds.

Examples

The following example shows how to set the IPv4 hitless purge timer to 60 seconds. 

device(config)# ip hitless-route-purge-timer 60
Parent topic: Commands I