router vsrp

Enables the Virtual Switch Redundancy Protocol (VSRP) on Layer 2 or Layer 3 switches.
Syntax
router vsrp
no router vsrp
Command Default

By default, VSRP is enabled on Layer 2 and Layer 3 switches.

Modes

Global configuration mode

Usage Guidelines

On a Layer 3 switch, if you want to use VRRP or VRRP-E for Layer 3 redundancy instead of VSRP, you must disable VSRP first. Because VRRP and VRRP-E do not apply to Layer 2 switches, there is no need to disable VSRP and there is no command to do so. VSRP is always enabled on Layer 2 switches.

The no form of the command disables VSRP.

Examples

The following example shows how to disable VSRP and then enable it. 

device(config)# no router vsrp
device(config)# router vsrp
Parent topic: Commands O, P, Q, R, and Sa through Sh