ipv6 pim border

Configures an interface to be on a PIM Sparse domain border.
Syntax
ipv6 pim border
no ipv6 pim border
Command Default

The interface is not configured as a border device.

Modes

Interface configuration mode

Usage Guidelines

The no form of this command removes the boundary on a PIM-enabled interface.

You must enable PIM globally before you enable it on an interface.

Examples

This example configures Ethernet interface 3/2/4 to be on a PIM Sparse domain border. 

device(config) interface ethernet 3/2/4
Device(config-if-e10000-3/2/4)# ipv6 pim border
Parent topic: Commands I