`lsdb-limit`

Configures the maximum number of link state advertisements (LSAs) in the link state database (LSDB).

Syntax

lsdb-limitvalue

no lsdb-limitvalue

Command Default

The maximum number of LSAs in the LSDB is 500000 for OSPFv2 and 250000 for OSPFv3.

Parameters

value: Specifies the maximum number of LSAs. For OSPFv2, valid values range from 1 through 500000. The default is 500000. For OSPFv3, valid values range from 1 through 250000. The default is 250000.

Modes

OSPF router configuration mode

OSPFv3 router configuration mode

Usage Guidelines

The no form of the command restores the default value.

Examples

The following example sets the maximum number of LSAs in the LSDB to 40 in OSPF router configuration mode.

device# configure terminal
device(config)# router ospf
device(config-ospf-router)# lsdb-limit 40

The following example sets the maximum number of LSAs in the LSDB to 50 in OSPFv3 router configuration mode.

device# configure terminal
device(config)# ipv6 router ospf
device(config-ospf6-router)# lsdb-limit 50

History

Release version	Command history
08.0.95	This command was introduced.

lsdb-limit