nbr-timeout

Configures the interval after which a PIM device considers a neighbor to be absent.
Syntax
nbr-timeout seconds
no nbr-timeout seconds
Command Default

The timeout interval is 105 seconds.

Parameters
seconds
Specifies the interval, in seconds. The range is 35 through 65535 seconds. The default is 105 seconds.
Modes

PIM router configuration mode

Usage Guidelines

The no form of this command restores the default timeout interval, 105 seconds.

You should set the interval to be not less than 3.5 times the hello timer value.

Examples

This example configures a PIM neighbor timeout value of 360 seconds on all ports on a device operating with PIM. 

Device(config)# router pim
Device(config-pim-router)# nbr-timeout 360
Parent topic: Commands N