show ip msdp sa-cache
show ip msdp
[
vrf
vrf-name
]
sa-cache
[
counts
]
[source-address
group-address
|
peer
peer-address
{
in
|
out
}
|
peer-as
as-number
|
orig-rp
rp-address
|
rejected
[
rpf
|
rp-filter
|
sg-filter
]
|
self-originated
]
User EXEC mode
The
show ip msdp sa-cache command displays the following information:
This example shows the source actives in the MSDP cache:
device> show ip msdp vrf my_vrf sa-cache Total of 10 SA cache entries Index RP address (Source, Group) Orig Peer Age 1 2.2.2.2 (192.6.1.10, 227.1.1.1) 192.1.1.2 0 2 2.2.2.2 (192.6.1.10, 227.1.1.2) 192.1.1.2 0 3 2.2.2.2 (192.6.1.10, 227.1.1.3) 192.1.1.2 0 4 2.2.2.2 (192.6.1.10, 227.1.1.4) 192.1.1.2 0 5 2.2.2.2 (192.6.1.10, 227.1.1.5) 192.1.1.2 0 6 2.2.2.2 (192.6.1.10, 227.1.1.6) 192.1.1.2 0 7 2.2.2.2 (192.6.1.10, 227.1.1.7) 192.1.1.2 0 8 2.2.2.2 (192.6.1.10, 227.1.1.8) 192.1.1.2 0 9 2.2.2.2 (192.6.1.10, 227.1.1.9) 192.1.1.2 0 10 2.2.2.2 (192.6.1.10, 227.1.1.10) 192.1.1.2 0
The following example configures to display only the entries matching a specific source.
device> show ip msdp sa-cache 1.1.1.1
The following example configures to display only the entries matching a specific group.
device> show ip msdp sa-cache 239.1.1.1
The following example configures to display only the SA cache entries that are received from peers in the BGP AS Number 100.
device> show ip msdp sa-cache 100
The following example configures to display only the SA cache entries that are originated by the RP 10.1.1.1.
device> show ip msdp sa-cache orig-rp 10.1.1.1
The following example configures to display only the rejected SAs. You can further narrow down by quoting the reason for rejection.
device> show ip msdp sa-cache rejected