manager network-config

Launches the ICX-Management configuration wizard.
Syntax
manager network-config
Modes

Privileged EXEC mode

Usage Guidelines

If a static IP address is to be used, a system administrator can use the wizard to configure the needed network configurations on the out-of-factory ICX device.

Examples

The following example shows the ICX-Management configuration wizard and user entries for the static IP address, network mask, gateway IP address, and DNS server IP address. 

device# manager network-config
Please enter IP address: 10.10.10.10
Please enter network mask: 255.255.255.128
Please enter gateway IP address: 10.10.10.1
Please enter DNS server IPs: 8.8.8.8
After the wizard is run, the corresponding running configuration will be sent to vSZ via a new json parameter in the SZ query:
"initialCli" : "vlan 1
router-interface ve 1
interface ve 1
ip address 10.10.10.10 255.255.255.128
ip dns server-address 8.8.8.8
ip route 0.0.0.0/0 10.10.10.1"
History
Release version Command history
08.0.92 This command was introduced.
Parent topic: Commands M