ip igmp max-response-time

Defines how long a device waits for an Internet Group Management Protocol (IGMP) response from an interface before determining that the group member on that interface is down and removing the interface from the group.
Syntax
ip igmp max-response-time value
no ip igmp max-response-time value
Command Default

The device waits 10 seconds for an IGMP response.

Parameters
value
Specifies the amount of time, in seconds, that the device waits for an IGMP response. Valid values range from 1 through 50. The default is 10 seconds.
Modes

Global configuration mode

Usage Guidelines

The no form of the command resets the maximum response time interval to the default of 10 seconds.

Examples

The following example changes the IGMP maximum response time to 30 seconds. 

device# configure terminal
device(config)# ip igmp max-response-time 8

The following example restores the IGMP maximum response time to the default of 10 seconds. 

device# configure terminal
device(config)# no ip igmp max-response-time
History
Release version Command history
08.0.95 This command was updated to change the IGMP maximum response time maximum value from 25 seconds to 50 seconds.
Parent topic: Commands I