logging console
To view syslog messages generated by a device, you need to display the syslog buffer or the log on a syslog server used by the device.
Global configuration mode
You can enter this command from the serial console or from a Telnet or SSH session.
You can enable the real-time display of syslog messages on the management console. When you enable this command, the software displays a syslog message on the management console when the message is generated. However, to enable the display of real-time syslog messages in Telnet or SSH sessions, you must also enable the display within the individual sessions.
The
no form of the command disables the real-time display of syslog messages.