show ipv6 pim rpf

Displays what PIM sees as the best reverse path to the source. While there may be multiple routes back to the source, the one displayed by this command is the one that PIM thinks is best.
Syntax
show ipv6 pim [ vrf vrf-name ] rpf ipv6-address [ group-address ]
Parameters
vrf vrf-name
Displays information for a VRF instance.
ipv6-address
Specifies the source IPv6 address for reverse-path forwarding (RPF) check.
group-address
Specifies the group IPv6 address for reverse-path forwarding (RPF) check.
Modes

User EXEC mode

Examples

The following example shows best reverse path to the specified source. 

device> show ipv6 pim rpf 2008:165::1010
upstream nbr 2006:503::1001 on v503
Parent topic: Show Commands