decnet-proto

Configures the DECnet protocol VLAN.
Syntax
decnet-proto [ name string ]
no decnet-proto [ name string ]
Command Default

The DECnet protocol VLAN is not configured.

Parameters
name string
Specifies the name of the DECnet protocol VLAN that you want to configure. The name can be up to 32 characters in length.
Modes

VLAN configuration mode

Usage Guidelines

The no form of the command removes the DECnet protocol VLAN.

Examples

The following example shows how to configure a DECnet protocol VLAN.

device(config)# vlan 2
device(config-vlan-2)# decnet-proto name Red
device(config-vlan-decnet-proto)# no dynamic