telnet server enable

Configures Telnet access only to clients in a specific VLAN.
Syntax
telnet server enable vlan vlan-num
no telnet server enable vlan vlan-num
Command Default

Telnet server is disabled.

Parameters
vlan vlan-num
Configures access only to clients connected to ports within the VLAN.
Modes

Global configuration mode

Usage Guidelines

You can restrict Telnet access to a Ruckus device to ports within a specific port-based VLAN. VLAN-based access control works in conjunction with other access control methods. Clients connected to ports that are not in the VLAN are denied management access.

The no form of the command allows Telnet access to all clients.

Examples

The following example shows how to allow Telnet access only to clients connected to ports within port-based VLAN 40. 

device# configure terminal
device(config)# telnet server enable vlan 40
device(config)# show running-config | in telnet
telnet server enable vlan 40

Disabling Telnet

The following example shows how to disable Telnet support.

device# configure terminal
device(config)# no telnet server enable vlan 1
device(config)# show running-config | in telnet
History
Release version Command history
10.0.10 Updated default telnet server status and added disabling telent example.
Parent topic: Commands Si - Z