show interfaces management
Displays the status of a management interface.
Parameters
Modes
Global configuration mode
Examples
To display the status of a management interface:
device(config-vlan-20)# show interfaces management 1 GigEthernetmgmt1 is disabled, line protocol is down Port down for 2 minute(s) 26 second(s) Hardware is GigEthernet, address is cc4e.24b4.6e64 (bia cc4e.24b4.6e7c) Configured speed auto, actual unknown, configured duplex fdx, actual unknown Configured mdi mode AUTO, actual unknown Member of VLAN 20, port is untagged, port state is NONE No port name MTU 1500 bytes 300 second input rate: 0 bits/sec, 0 packets/sec, 0.00% utilization 300 second output rate: 0 bits/sec, 0 packets/sec, 0.00% utilization 0 packets input, 0 bytes, 0 no buffer Received 0 broadcasts, 0 multicasts, 0 unicasts 0 input errors, 0 CRC, 0 frame, 0 ignored 0 runts, 0 giants 0 packets output, 0 bytes, 0 underruns Transmitted 0 broadcasts, 0 multicasts, 0 unicasts 0 output errors, 0 collisions
History
| Release version | Command history |
|---|---|
| 08.0.50 | This command was introduced. |