`auth allow-tagged enable`

Allows tagged packets to be processed when the port is not tagged in the incoming tagged VLAN.

Syntax

auth allow-tagged enable

no auth allow-tagged enable

Command Default

By default, processing tagged packets is disabled.

Modes

Interface configuration mode

Usage Guidelines

The no form of the command disables tagged packet processing.

Examples

The following example enables tagged packet processing on port 1/1/1.

device# configure terminal
device(config)# interface ethernet 1/1/1
device(config-if-e10000-1/1/1)# auth allow-tagged enable

History

Release version	Command history
08.0.80	This command was introduced.

Did you find what you were looking for?