lldp advertise max-frame-size
lldp advertise max-frame-size
ports
{
all
| [
ethernet
unit/slot/port
[
to
unit/slot/port
]
... ]
}
no lldp advertise max-frame-size
ports
{
all
| [
ethernet
unit/slot/port
[
to
unit/slot/port
]
... ]
}
The maximum frame size is automatically advertised when Link Layer Discovery Protocol (LLDP) is enabled on a global basis.
The maximum frame size is 1522 octets.
Global configuration mode
The maximum frame size TLV provides the maximum 802.3 frame size capability of the
port. This value is expressed in octets and includes the four-octet Frame Check Sequence
(FCS). The default maximum frame size is 1522. The advertised value may change if
the
aggregated-vlan
or
jumbo command is configured.
You can specify a list of ports, separated by a space, or a range of ports, or you can combine lists and ranges.
The command cannot support LAG virtual interfaces. Attempting to configure them will have no effect.