ip igmp max-group-address

Configures the maximum number of Internet Group Management Protocol (IGMP) group addresses.
Syntax
ip igmp max-group-address num
no ip igmp max-group-address num
Command Default

The default number of IGMP group addresses is 4096.

Parameters
num
Specifies the maximum number of IGMP group addresses available, either for the default VRF or for a specified VRF.
Modes

Global configuration mode

Interface subtype configuration mode

VRF configuration mode

Usage Guidelines

This command replaces the system-max igmp-max-group-address command.

The no form of the command restores the default value (4096).

Examples

The following example configures a maximum of 1000 IGMP addresses for the default VRF. 

device# configure terminal
device(config)# ip igmp max-group-address 1000

The following example configures a maximum of 1000 IGMP group addresses for the VRF named vpn1. 

device# configure terminal
device(config)# vrf vpn1
device(config-vrf-vpn1)# address-family ipv4
device(config-vrf-vpn1-ipv4)# ip igmp max-group-address 1000

The following example configures a maximum of 1000 IGMP group addresses for a VE interface.

device# configure terminal
device(config)# interface ve 10
device(config-vif-10)# ip igmp max-group-address 1000
History
Release version Command history
09.0.10 Support for this command was added at Interface configuration mode.
Parent topic: Commands I