temperature warning

Changes the temperature threshold at which the device sends a syslog message and an SNMP trap.
Syntax
temperature warning { stack-id temp-threshold }
Command Default

The default threshold varies by the hardware device. Refer to the hardware installation guide for your device.

Parameters
stack-id
Stack number. Value is from 1 to 8.
temp-threshold
Temperature warning level, in Celsius. See Usage Guidelines for more details.
Modes

Privileged EXEC mode

Usage Guidelines

When setting the temp-threshold option, you must not set this level higher than the maximum value allowed by your device. The temperature warning level must be at least five degrees Celsius less than the temperature shutdown level, which is automatically set by the device.

Examples

The following example sets the temperature threshold to 75°C. 

device# temperature warning 1 75
Parent topic: Commands Si - Z