show lldp neighbors

Displays a list of current LLDP neighbors and details of the latest advertisements received from Link Layer Discovery Protocol (LLDP) neighbors.
Syntax
show lldp neighbors[detailports{all|ethernetstack-id/slot/port [tostack-id/slot/port|[ethernetstack-id/slot/porttostack-id/slot/port |ethernetstack-id/slot/port ] ...]}]
Parameters
detail
Displays detailed neighbor data.
ports
Displays the details of the latest advertisements received from LLDP neighbors for the specified port.
all
Displays the details of the latest advertisements received from LLDP neighbors for all LLDP-enabled ports.
ethernetstack-id/slot/port
Displays the details of the latest advertisements received from LLDP neighbors for the specified Ethernet port.
tostack-id/slot/port
Displays the details of the latest advertisements received from LLDP neighbors for a range of ports.
Modes

User EXEC mode

The show lldp neighbors command displays the following information.

Output field Description
Lcl Port The local LLDP port number.
Chassis ID The identifier for the chassis. RUCKUS ICX devices use the base MAC address of the device as the Chassis ID.
Port ID The identifier for the port. RUCKUS ICX devices use the permanent MAC address associated with the port as the port ID.
Port Description The description for the port. RUCKUS ICX devices use the ifDescr MIB object from MIB-II as the port description.
System Name The administratively-assigned name for the system. RUCKUS ICX devices use the sysName MIB object from MIB-II, which corresponds to the CLI hostname command setting.
Examples

The following is sample output from the show lldp neighborsdetail command. 

device# show lldp neighbors detail ports ethernet 1/1/9:1

Local port: 1/1/9:1
Neighbor  : 748e.f8f9.7489, TTL 92 seconds
    + Chassis ID (MAC address) : 0000.0126.2057
    + Port ID (MAC address)    : 748e.f8f9.7489
    + Time to live             : 120 seconds
    + System name              : "7650Stk-Seth"
    + Port description         : "10GigabitEthernet1/1/10"
    + System capabilities      : bridge, router
      Enabled capabilities     : bridge, router
    + 802.3 MAC/PHY            : auto-negotiation supported, but disabled
      Operational MAU type     : Other
    + Link aggregation         : aggregated (aggregated port ifIndex: 10)
    + Maximum frame size       : 10200 octets
    + Port VLAN ID             : none
    + Management address (IPv4): 10.37.160.126
Parent topic: Show Commands